RSL NDT - NDT Equipment, Consumables, Repairs and Calibration

	NDT Equipment, Consumables, Repairs and Calibration

Hardness Testing

RSL supply a wide range of Hardness Testing equipment from various manufacturers.

Suppliers:

Products:

Dynapocket

Compact, cable free design: impact device and display in one instrument
Easy on-site hardness testing on solid non-transportable components and even on positions difficult to access
Operation based on the Rebound (Leeb) Principle with special signal processing technique. The instrument senses the test direction and automatically compensates for gravitational effects
Easily and clearly arranged operation via two keys
Hardness measurement independent of impact direction
Direct readout of the digitally displayed hardness value on a large LCD display
Display of the single or average value
Standard conversion tables stored for nine material groups
Conversion of the hardness value for hardness scales HL, HV, HB, HS, HRB, HRC and N/mm2
Measurement ranges (material dependant) 150 to 1000 HL, 75 to 1000 HV, 75 to 700 HB, 30 to 100 HS, 35 to 100 HRB, 20 to 70 HRC, 250 to 2200 N/mm2
Measurement accuracy (standard deviation) +- 4 HL or 0,5 % at 800 HL (average value of 5 measurements related to the average value of the hardness reference block)
Operates on standard batteries (2 x AAA)

TIV (Through Indenter Viewing)

Hardness Testing according to Vickers under test load
Through Indenter Viewing by means of special optics and a CCD camera
Direct checking and assessment of the quality of measurement by observing the growing indentation on the colour display
Fully automatic evaluation of the Vickers indentation and determination of the diagonals without detour (via microscope)
Independent of test direction and test object's material
Measurement range from approximately 30HV to more than 1000HV (depending on probe)
Clearly arrange data memory for convenient and structure saving of the test results. Test series can be recalled and edited

134 Portable Hardness Tester

Portable, accurate, versatile, lightweight & robust
Applies the full 29 420N (3000 kbf) test force on a 10mm ball - other test forces and indentors available
Applies the full test force with an accuracy of 0.5%
May be equally well used as a bench machine or may be taken to the job
Used in any position - in any location the tester is always accurate. Removeable test head and standard accessories make its application almost unlimited. Special adapters can be supplied

MIC 10 Hardness Tester

The small, handy MIC 10 makes life easy for you: a hardness tester that you can take anywhere - on scaffolds for testing large containers and pipes, or for testing components at any location. The small narrow probes even enable you to make measurements on positions difficult to access, such as tooth flanks or roots of gears. You can measure in any direction, e.g. in the horizontal or overhead positions. The instrument carrier and prop-up stand permits two hand operation, for correct probe positioning and guidance.

Equotip 3 Hardness Tester

Email: info@rslndt.com

RSL Aberdeen

Tel: 01224 822600

RSL Sheffield

Tel: 07595 120927

RSL Kenged

Tel: 01698 285914